Position:Home > NewsNews

Frame forming machine in detail

1.molding process, Automatic feeding - oriented - leveling, feeding, continuous punching, forming, scale, cut off - receiving
2. unit performance
2.1 scope of rolled plate Material: galvanized sheet, low carbon steel, such as Q235 Plate thickness:0.8≤∮≤1.5㎜ Plate width: 150≤§≤300㎜
2.2 area of production covers : long 30 m X 3 m wide
2.3 Installed capacity :42 kw
2.4 equipped with air: air: 0.9 cubic/minutes, 0.6 ~ 0.7 MPa 3.the main components of the technology parameters
3.1 automatic feeding machine:
3.1.1 increase within type, load 3T
3.1.2 4 kw variable frequency motor
3.1.3 coil diameter: ¢500 ~ ¢520 mm, coil diameter:≤1200
3.1.4 electric induction automatically control the feeding speed
3.2 guide frame:
3.2.1 a pair of horizontal roller, two opposite to the roller
3.2.2 be meticulously move, guide mobile function
3.3 Leveling machine
3.3.1 straightening roller: 4/4, before and after each pair of pinch roll.
3.3.2 rainfall distribution on 10-12 leveling ring material range: wait the aniseed 350 mm wide Wait the most aniseed 0.8 1.5 mm thick
3.3.3 driving force: 2 kw servo motor 3.4 continuous punching parts
3.4.1 frame: four pillar type punching machine frame
3.4.2 die, die Die material: Cr12, quenching treatment, hardness of 58-62 °
3.5 forming the host
3.5.1 frame: frame for the gantry, side pull roller replacement.
3.5.2 molding frame: 18
3.5.3 largest feed width or less 350 ㎜, rolled plate thickness: 0.8 or less 30 ㎜ 1.5 or less
3.5.4 rolling roller diameter: ¢60 mm, 40 cr material, heat treatment, conditioning
3.5.5 roller material: GCr15, overall quenching treatment, hardness HRC56-62 o
3.5.6 motor power: 22 kw variable frequency motor, ZQ400 type reducer
3.5.7 transmission way: each frame with a gear distribution box transmission (in addition to the main power position)
3.6 cut off part
3.6.1 hydraulic blade cut off
3.6.2 hydraulic pump station: 5.5 kw
3.6.3 blade material: Cr12, quenching process.
3.7 electrical control: PLC control, LCD display, operation encoder fixed length.
Copyright © 2018  www.roofingrollformingmachine.com }
All Rights Reserved